4 Vessels Beer Brewing Equipment For Sale

4 Vessels Beer Brewing Equipment For Sale

Capacity:2000L Material: stainless steel Suitable for large breweries
Chat Now

Product Details

4 vessels beer brewing equipment for sale

QQ20201201125700

mash tun

Use SUS304 stainless steel plate; need to use food grade 304

The effective volume is 2.3m³, and the nominal volume is 3.1m³; it cannot be calculated by weight, it needs to be calculated by volume, and the density is different.

Excluding the volume of the head, the effective volume accounts for 75% of the cost. The effective volume of 2000 liters should be large, and the effective volume is 2300 liters.

Dimensions: φ1900×4500mm; diameter-to-height ratio is within about 1:2.

Adopt upper and lower cone seal design; the overall design is more beautiful

Temperature sensor; adopts automatic control PT100

The double-stage steam jacket has independent zone heating; the two-stage heating has a faster heating speed, can control the temperature requirements of the saccharification process, and the heating effect is better. The one-stage bottom heating effect is poor.

Equipped with steam stop valve, pneumatic angle seat valve, pressure gauge and safety components; heating can realize automatic saccharification function, and the bottom has a floating ball trap, which has good drainage effect and improves steam utilization effect;

The heating area is 3.5㎡;

Saccharification time, when the temperature is reached, there is an alarm reminding device

Jacket steam pressure≤0.40MPa; safer use range

Stirring is placed under the bottom, a new horizontal motor reducer, frequency conversion speed regulation; frequency conversion can better protect the motor and adjust the flow rate. Note that the motor should be a variable frequency motor.

The round stainless steel glass manhole is equipped with explosion-proof sight light; it is convenient to observe the internal saccharification situation.

Outdoor exhaust, equipped with anti-backflow device; prevent pump evacuating; prevent increase of wort oxidation.

The inner pin is used to connect the cleaning ball; the connection of the cleaning ball is different, the internal structure changes, and it is not easy to damage.

The thickness of the inner bladder of the cylinder is 3 mm, the thickness of the inner cone is 4 mm, and the inner surface is pickled and passivated; the outer thickness is 2 mm, and the outer surface is brushed;

The aluminum silicate insulation layer is adopted, and the insulation thickness is 100 mm; the insulation effect is better.

There is a malt powder silo on the top, 1.65m³, stainless steel pneumatic flapper valve; there is a powder silo on the top, the volume becomes larger after crushing, 400kg*1.8*2.3

The feeding mixing water is equipped with electromagnetic flowmeter and electric control mixing valve; it can control the water consumption of saccharification more accurately, the saccharification number is more accurate; the temperature of saccharification water is more accurate, the temperature control is better, and the saccharification is more stable.

Matching valve accessories.

Lauter tun

Use SUS304 stainless steel plate;

The effective volume is 2.3m³, and the nominal volume is 3.1m³; it cannot be calculated by weight, it needs to be calculated by volume, and the density is different.

Excluding the volume of the head, the effective volume accounts for 75% of the cost. The effective volume of 2000 liters should be large, and the effective volume is 2300 liters.

Dimensions: φ2000×4500mm; calculated according to the feeding amount, the height of the wheat layer is 30CM, and the filtering effect is better. According to the requirements of brewing, different fermentation tanks can be configured if high-concentration beer is produced.

The upper cone is sealed with a flat bottom design;

The top is equipped with a return port and a spraying lees washing device; equipped with a return flow, the wort is clear; spraying to wash the lees does not affect the filtration and speeds up the filtration.

Fully milled sieve plate with backwashing device at the bottom; no need to disassemble the sieve plate, easy to clean, and speed up the winemaking speed.

Equipped with stainless steel balance tank; protects the sieve plate of the lees layer, not easy to form a vacuum, and obtains a more stable wort flow

There is a wort collection tube and a backwash tube at the bottom; a ring-shaped collection tube makes the wort flow stable and will not damage the lees layer.

It adopts a new type of lower-mounted and liftable mechanical tillage knife at the bottom, which can automatically produce grains, a horizontal motor reducer, and frequency conversion speed regulation; the tillage knife has an automatic grain production function, the overall motor is equipped with a frequency conversion, which can adjust the speed and save labor.

The bottom of the spout outlet is equipped with a stainless steel pneumatic flapper valve and a 500-liter stainless steel dregs recovery trolley; the stainless steel pneumatic flapper valve is more convenient to operate and direct the spoilage.

Use round stainless steel glass manhole with explosion-proof sight light;

Internal pin to connect the cleaning ball;

The filter pipeline is equipped with an electromagnetic flowmeter; it can get a more accurate wort volume and a more accurate value. The brewing value is more accurate.

The thickness of the bottom plate is 6 mm, the thickness of the inner cylinder is 3 mm, the inner surface is pickled and passivated; the outer thickness is 2 mm, and the outer surface is brushed;

Use aluminum silicate insulation layer, insulation thickness 100mm;

Matching valve accessories.

 Boiling kettle

Use SUS304 stainless steel plate;

The effective volume is 2.4m³, the nominal volume is 3.6m³; the volume of the equipment of 2000 liters is calculated, and the overall calculation is 2400L, accounting for 66.7% of the calculation. There will be no boiling over and avoid loss. The amount of wort obtained can reach 2000 liters. Otherwise, the amount of wort obtained will be reduced. Affect the alcohol output throughout the year. The minimum per batch is 150 liters, the whole tank is 300 liters, the budget is 300 days, and the wine loss is 90,000 liters a year. If it is cost-effective by weight, the loss will be even more.


Dimensions: φ1900×4500㎜;

Adopt upper and lower cone seal design;

Temperature Sensor;

The two-stage steam jacket is heated in separate zones; the heating effect will be better, and when the filtration is completed, it will quickly enter the boiling state. Save time for brewing.

Equipped with steam stop valve, pneumatic angle seat valve, pressure gauge and safety components; with float trap at the bottom;

The heating area is 3.5㎡;

Jacket steam pressure ≤0.40MPa;

Use round stainless steel glass manhole with explosion-proof sight light;

Outdoor exhaust, equipped with anti-backflow device; can be equipped with indoor recovery device; prevent oxidation of oxidized wort.

Internal pin to connect the cleaning ball;

Strong convection device. Increase the evaporation capacity to 8% of the evaporation capacity.

It can be increased, adding wine time to alarm time.

The thickness of the inner bladder of the cylinder is 3 mm, the thickness of the inner cone is 4 mm, and the inner surface is pickled and passivated; the outer thickness is 2 mm, and the outer surface is brushed;

Use aluminum silicate insulation layer, insulation thickness 100mm;

Matching valve accessories.

Whrilpool tank

Use SUS304 stainless steel plate;

Effective volume 2.1m³, nominal volume 2.6m³;

Dimensions: φ1900×4500㎜;

Adopt upper cone seal and lower inclined flat bottom design;

Rotary sinking tangent feed inlet;

Three-stage discharge port design: reduce the increase in chromaticity and reduce the time of spinning.

Inclined flat bottom design;

Use round stainless steel glass manhole with explosion-proof sight light;

Internal pin to connect the cleaning ball;

The inner bladder thickness of the cylinder is 3mm, the inner surface is pickled and passivated; the outer thickness is 2mm, and the outer surface is brushed;

Using aluminum silicate insulation layer, insulation thickness 80mm;

Matching valve accessories.

 Hot water tank

Use SUS304 stainless steel plate;

Adopt upper and lower cone seal design;

Using steam heat exchanger heating method, high heating efficiency;

With liquid level pipe and drain valve at the bottom;

Temperature Sensor;

Overflow pipe;

Round stainless steel manhole;

The inner bladder thickness of the cylinder is 3mm, the inner surface is pickled and passivated; the outer thickness is 2mm, and the outer surface is brushed;

Using aluminum silicate insulation layer, insulation thickness 80mm;

Matching valve accessories.

With hot water recovery function, hot water recovery, saccharification water, and washing water

All use SUS304 stainless steel plate,

The total volume is 5500L, the effective volume is 4000L;

Dimensions: φ1700×4200mm; the ratio of the diameter to the height of the liquid level of the cylinder is 1:1, 1:1.5, this size is 1: 1.27, the total height of the diameter and the wort liquid level, mainly refers to the cylinder part. Usually the cone angle is 60-75 degrees,

Upper disc seal and lower cone seal;

Maximum working pressure: tank body 2bar, jacket with a maximum resistance of 0.2bar;

Liner polishing, pickling passivation;

Outsourcing stainless steel wire drawing board on the outer surface;

Cooling method: ice water cooling jacket, cooling adopts two-stage independent cooling, controlled by solenoid valve;

Washing method: fixed washing ball Ф25, washing working pressure 2bar, connection method internal thread;

Dual temperature measurement points (temperature-tube section against cone) and platinum thermal resistance;

Pressure gauge 0-0.6MPa, pressure discharge mechanical pressure regulating valve with water seal Ф38;

Breathing valve, Ф50 opening pressure 0.001-0.003MPa, exhaust pressure 0.22 MPa;

Sanitary welded sampling valve DN25;

Polyurethane foam insulation, the thickness of the insulation layer is 100 mm;

Outlet Ф38;

Cooling area: 5.5m2;

QQ20190805114625

PLC










Hot Tags: 4 vessels beer brewing equipment for sale, China, Suppliers, Manufacturers, Factory

Inquiry

You Might Also Like