Cooling Jacket Fermentation Tanks

All tank are made of 304 stainless steel
Adopting world famous brand components
Pressure controlled by pressure gauge
The tanks are welded by TIG welding
The tank will be polished 3 times
Each tank will be tested by water and air
Chat Now

Product Details

Cooling jacket and cooling area: Cone fermentation tank cooling is often used for indirect cooling. Generally, semicircular pipe, channel steel, arc pipe jacket, or Miller plate jacket are used to cool with liquid secondary refrigerant at low temperature and low pressure (-3 ℃, 0.03MPa). Often use 20% to 30% alcohol solution, or 20% propylene glycol aqueous solution as a refrigerant.
Depending on the tank capacity, cooling can be two-stage or three-stage. Cooling area according to the tank material, stainless steel material is generally 0.35 ~ 0.4m / m fermentation broth, carbon steel tank 0.5 ~ 0.62m / m fermentation broth. Cone bottom cooling area should not be too large, to prevent the storage period beer icing.
Insulation layer and protective layer: Insulation material requires thermal conductivity, low volume, low water absorption, non-flammable and other characteristics. Commonly used insulation material polyurethane. Insulation thickness is generally 80mm.

The cooling jacket plate


The basic principle of fermentation: wort by preparation, cooling, adding yeast, transported to the fermentation

tank, began to ferment. The traditional process is divided into pre-fermentation and post-fermentation, were

carried out in different fermentors, the popular practice is to conduct a fermentation in a tank. Pre-fermentation

is mainly the use of yeast to transform maltose in wort into alcohol (ie, the anaerobic respiration of yeast), after fermentation is mainly to produce some flavor substances, to eliminate the smell of beer and promote the

maturation of beer.


Main Features
1) All tank are made of 304 stainless steel
2) Adopting advanced world famous brand components in electric parts and operation parts.
3) Fermentation pressure controlled by pressure gauge automatically
4) The tanks are welded by TIG welding
5) The tank will be polished 3 times
6) Each tank will be tested by water and air


1. Can your brewing equipment make both lager and ale?
A: Yes, our beer brewing equipment can make both lager and ale.
2. How to achieve temperature control?
A: The PLC or digital dispalyer could control the temperature by connecting with the PT 100 sensor. The brewing tanks with rock wool to keep warm, the fermenters and bright beer tank with PU as cooling jacket to keep cool.
3. Is it possible to supply installation in our country?
A: Yes, we could supply our clients over sea service and direct the installation and brewing.